稚嫩漂亮的大学生酒店在线

      <ruby id="bl391"><strike id="bl391"><var id="bl391"></var></strike></ruby>

      <video id="bl391"></video>

      Skip navigation Accessibility information

      Index of Materials - P



      Metals and Materials for Research and Industry

      Goodfellow supplies metals, polymers, ceramics and other materials to meet the research, development and specialist production requirements of science and industry worldwide.

      This interactive Catalogue lists all our standard products. You can buy all of them online but if you cannot find exactly what you need, please contact us.


      P-Type - Electrical Type
      P100 - Grade
      Pale Grey - Colour
      Palladium ( Pd )
      Palladium/Chromium ( Pd94/Cr 6 )
      Palladium/Copper ( Pd60/Cu40 )
      Palladium/Nickel ( Pd95/Ni 5 )
      Palladium/Silver ( Pd75/Ag25 )
      Palladium/Silver ( Pd77/Ag23 )
      Paper - Type
      Particle Size D10 - 15-35 Micron
      Particle Size D50 - 90 Micron
      Parylene - Coating
      Paste Extruded - Condition
      Pb 96%, Sn 1.5%, Sb 2.5% - Composition
      Pb 97%, Sn 1.5%, Sb 1.5% - Composition
      PDMS
      Peelable - Heat Sealable - Grade
      Pellets - Condition
      Pellets - Nominally 10mm Diameter x 10mm Length - Condition
      Pellets - nominally 3mm diameter x 3mm length - Condition
      Pellets - Nominally 3mm Diameter x 6.5mm Length - Condition
      Pellets - nominally 6.35mm diameter x 6.35mm length - Condition
      PEN
      Peridot ( Mg2Fe2/SiO4 )
      Permalloy C® - Magnetic Shielding Alloy ( Ni77/Fe14/Cu 5/Mo 4 )
      Permalloy D® - Invar® - Controlled Expansion Alloy ( Fe64/Ni36 )
      Permanent Aluminium 0.04mm - Support
      Permanent Copper - Support
      Permanent Mylar® 3.5micro-m - Support
      Permendur 49® - Permendur 49® ( Co49/Fe49/V 2 )
      Perovskite - Condition
      Perspex - Polymethylmethacrylate ( PMMA, Acrylic )
      PET
      PET - Substrate
      Phenolic - Adhesive
      Phosphor Bronze ( Cu94/Sn 6 )
      Phosphor Bronze ( Cu95/Sn 5 )
      Phosphor Bronze ( Cu92/Sn 8 )
      Phosphorene
      Phosphorous Deoxidised Non Arsenical Copper - Copper - DHP ( Cu - DHP )
      Phosphorus ( P )
      Phosphorus - Dopant
      Piezo-electric Film - Condition
      Plain - Weave
      Plain Weave Mesh - Type
      Platelet Planar Size - 0.3-5micro-m
      Platelet Thickness - 1+/-0.7 nm (3 +/- 2 layers)
      Platelet Thickness - 3+/-2 nm (9 +/- 6 layers)
      Platelet Thickness - <50nm
      Platinised - Condition
      Platinised on Both Sides 2 Micron Thick - Condition
      Platinum ( Pt )
      Platinum Plated Wire - Condition
      Platinum/Iridium ( Pt85/Ir15 )
      Platinum/Iridium ( Pt90/Ir10 )
      Platinum/Iridium ( Pt80/Ir20 )
      Platinum/Iridium ( Pt70/Ir30 )
      Platinum/Iridium ( Pt75/Ir25 )
      Platinum/Rhodium ( Pt80/Rh20 )
      Platinum/Rhodium ( Pt90/Rh10 )
      Platinum/Rhodium ( Pt87/Rh13 )
      Platinum/Rhodium ( Pt70/Rh30 )
      Platinum/Rhodium ( Pt94/Rh 6 )
      Platinum/Rhodium ( Pt83/Rh17 )
      Platinum/Rhodium ( Pt60/Rh40 )
      Platinum/Tungsten ( Pt92/W 8 )
      Please note, these sheets are bowed - Condition
      Plexiglas - Polymethylmethacrylate ( PMMA, Acrylic )
      Polish - 0.025 - 0.05micro-m Ra
      Polish - 0.05 - 0.1micro-m Ra
      Polish - 0.1micro-m Ra or better
      Polished - Surface Finish
      Polished Both Ends - Surface Finish
      Polished on 1 side / dull on 1 side - Condition
      Polished On All Sides - Surface Finish
      Polished on Both Sides - Scratch/Dig <40/20 - Surface Finish
      Polished On Both Sides - Surface Finish
      Polished On Both Sides to 1 Micron - Surface Finish
      Polished On One Side - Surface Finish
      Polished On One Side To 1 Micron - Surface Finish
      Poly L lactic acid - Biopolymer ( PLLA )
      Poly(ethylene-co-vinyl acetate) ( EVA )
      Polyacrylamide/acrylate ( Hydrogel )
      Polyacrylonitrile ( PAN )
      Polyacrylonitrile-butadiene-styrene ( ABS )
      Polyamide - Nylon 4, 6 ( PA 4,6 )
      Polyamide - Nylon 6 ( PA 6 )
      Polyamide - Nylon 6 - 30% Glass Fibre Reinforced. ( PA 6 30% GFR )
      Polyamide - Nylon 6 - 40% Glass Fibre Reinforced. ( PA 6 40% GFR )
      Polyamide - Nylon 6, 6 ( PA 6,6 )
      Polyamide - Nylon 6, 6 - 30% Carbon Fibre Reinforced ( PA 6, 6 - 30% CFR )
      Polyamide - Nylon 6, 6 - 30% Glass Fibre Reinforced ( PA 6,6 30% GFR )
      Polyamide - Nylon 6,10 ( PA 6,10 )
      Polyamide - Nylon 11 ( PA 11 )
      Polyamide - Nylon 12 ( PA 12 )
      Polyamide - Nylon 12 - 30% Glass Fibre Reinforced ( PA 12 - 30% GFR )
      Polyamide/imide ( PAI )
      Polyaramid ( Polyparaphenylene terephthalamide )
      Polyaramid ( Polymetaphenylene isophthalamide )
      Polyaramid/Polyphenylenesulphide Composite ( Polyaramid fibre - PPS Matrix )
      Polyaramid/Vinylester Composite ( Polyaramid fibre - Vinylester matrix )
      Polybenzimidazole ( PBI )
      Polybutylene terephthalate ( PBT )
      Polybutylene terephthalate - 30% Glass Fibre Reinforced ( PBT 30% GFR )
      Polycarbonate ( PC )
      Polycarbonate - 20% Glass Fibre Filled ( PC - 20% GFR )
      Polycarbonate - 30% Carbon Fibre Reinforced ( PC - 30% CFR )
      Polycarbonate - 30% Glass Fibre Filled ( PC - 30% GFR )
      Polychlorotrifluoroethylene ( PCTFE )
      Polycrystalline - Condition
      Polydimethylsiloxane
      Polyester - Insulation
      Polyester - Support
      Polyetheretherketone ( PEEK )
      Polyetheretherketone 20% mineral filled ( PEEK )
      Polyetheretherketone 30% mineral filled ( PEEK )
      Polyetheretherketone, 20% Glass Fibre Reinforced ( PEEK - 20% GFR )
      Polyetheretherketone, 30% Glass Fibre Reinforced ( PEEK - 30% GFR )
      Polyetherimide ( PEI )
      Polyetherimide - 30% Glass Fibre Reinforced ( PEI 30% GFR )
      Polyetherketone ( PEK )
      Polyetherketoneketone ( PEKK )
      Polyethersulphone ( PES )
      Polyethylene - Carbon filled ( PE )
      Polyethylene - High density ( HDPE )
      Polyethylene - Low Density ( LDPE )
      Polyethylene - U.H.M.W. ( UHMW PE )
      Polyethylene naphthalate ( PEN )
      Polyethylene terephthalate ( Polyester, PET, PETP )
      Polyethylene/Polyethylene Composite ( PE fibre - PE matrix )
      Polyhydroxyalkaonate - Biopolymer ( PHA )
      Polyhydroxybutyrate - Biopolymer ( PHB )
      Polyhydroxybutyrate/Polyhydroxyvalerate 1% - Biopolymer ( Biopolymer )
      Polyhydroxybutyrate/Polyhydroxyvalerate 2% - Biopolymer ( Biopolymer )
      Polyhydroxybutyrate/Polyhydroxyvalerate 8% - Biopolymer ( PHB92/PHV 8 )
      Polyimide ( PI )
      Polyimide - Insulation
      Polyketone ( PK )
      Polyketone 30% Glass Fibre Reinforced ( PK )
      Polyketone 30% Glass Fibre Reinforced ( PK )
      Polyketone 50% Glass Fibre Reinforced ( PK )
      Polyketone Bearing Grade ( PK )
      Polylactic acid - Biopolymer ( PLA )
      Polylactic acid - Biopolymer - Graphene Enhanced ( PLA +Graphene )
      Polylactic acid - Biopolymer -- Nanodiamond enhanced ( PLA + Nanodiamond )
      Polymer - Bolt
      Polymer - Chopped Fibre
      Polymer - Component
      Polymer - Fabric
      Polymer - Fibre
      Polymer - Film
      Polymer - Flake
      Polymer - Foam
      Polymer - Granule
      Polymer - Honeycomb
      Polymer - Laminate
      Polymer - Mesh
      Polymer - Metallised Film
      Polymer - Monofilament
      Polymer - Nut
      Polymer - Powder
      Polymer - Rod
      Polymer - Sheet
      Polymer - Sphere
      Polymer - Tube
      Polymer - Washer
      Polymers
      Polymethylmethacrylate ( PMMA, Acrylic )
      Polymethylpentene ( TPX® )
      Polyoxymethylene - Copolymer ( Acetal - Copolymer POMC )
      Polyoxymethylene - Homopolymer ( Acetal - Homopolymer POMH )
      Polyoxymethylene Homopolymer 20% PTFE Fibre Filled ( POM H 20% PTFE )
      Polyoxymethylene Homopolymer 25% Glass Fibre Filled ( POM H 30% GFR )
      Polyoxymethylene/Acetal Copolymer - 10% Carbon Fibre Reinforced ( POMC - 10% CFR )
      Polyphenyleneoxide ( PPO (modified), PPE (modified) )
      Polyphenyleneoxide (modified), 30% Glass Fibre Reinforced ( PPO 30% GFR )
      Polyphenylenesulphide ( PPS )
      Polyphenylenesulphide - 20% Carbon Fibre Reinforced ( PPS - 20% CFR )
      Polyphenylenesulphide - 40% Glass Fibre Reinforced ( PPS - 40% GFR )
      Polyphenylsulphone ( PPSu )
      Polyphthalamide 35% glass fibre filled ( PPA )
      Polyphthalamide 50% glass fibre filled ( PPA )
      Polyphthalamide 55% glass fibre filled ( PPA )
      Polypropylene ( PP )
      Polypropylene-Polypropylene composite ( PP fibre - PP matrix )
      Polystyrene ( PS )
      Polystyrene - Conductive ( High Impact Conductive Polystyrene )
      Polystyrene - Cross-linked ( PS - X - Linked )
      Polystyrol - Polystyrene ( PS )
      Polysulphone ( PSu )
      Polytetrafluoroethylene ( PTFE )
      Polytetrafluoroethylene - 25% Carbon Filled ( PTFE )
      Polytetrafluoroethylene coated Glass Fabric ( PTFE 75 / Glass 25 )
      Polytetrafluoroethylene filled with Glass ( PTFE 25% GF )
      Polyurethane ( PU )
      Polyurethane - Adhesive
      Polyurethane - Insulation
      Polyvinylchloride - Unplasticised ( UPVC )
      Polyvinylfluoride ( PVF )
      Polyvinylidenechloride ( PVDC )
      Polyvinylidenefluoride ( PVDF )
      Porcelain Mullite - Condition
      Porous Alumino-Silicate - Condition
      Porous Borosilicate Glass - Condition
      Porous Membrane - Condition
      Potassium ( K )
      Potassium Aluminosilicate ( Muscovite Mica )
      Powder
      Powder Coated on Both Sides - Condition
      Praseodymium ( Pr )
      Precipitation Hardenable - Condition
      Precision Sphere - Grade
      Pressboard - Condition
      Pressed - Condition
      Printable Both Sides - Condition
      Produced Using BU396311 - Condition
      PRODUCTION ONLY - Condition
      Propathene - Polypropylene ( PP )
      PTFE (Polytetrafluoroethylene) - Insulation
      Pultruded - Condition
      Pure Sn Coated - Condition
      Purity - >80%
      Purity - 90%
      Purity - 98%
      Purity - 99%
      Purity - 99.5%
      Purity - 99.6%
      Purity - 99.7%
      Purity - 99.9%
      Purity - 99.95%
      Purity - 99.99%
      Pyrolitic - Condition
      Pyrolytic Graphite - Condition
      Pyrophyllite ( Silica 56.8%, Alumina 33.4%, TiO2, Fe3O4 + )

      Index